Replacing the temples on a pair of Ray-Ban RB2140 Wayfarer sunglasses is very easy: you undo the hinge screw, remove the broken temple and screw on the new one. With a precision screwdriver it takes just a few minutes. We explain it step by step, and you can watch it done live in the video above.
The Wayfarer is Ray-Ban’s most iconic acetate model, the star of countless films and as current as the day it was launched. Many of you have asked us for this tutorial, so here it is.
When should you replace the temples?
Wayfarer temples tend to suffer from knocks, from being sat on or from being left in the sun inside the car for a long time. It is worth replacing them when they are broken, when the hinge is loose even after tightening the screw, or when the temple has warped and no longer returns to its shape. If the front is in good condition, replacing just the temples is much cheaper than buying a new pair of sunglasses.
Before you start
Check your model and lens size
On the inside of the temple you’ll see the reference of your glasses, in a format such as “RB3025 001 58□14”. In your case it should start with “RB2140”. This is followed by the frame color code and two numbers separated by a square: the lens size (lens width) and the bridge. The Wayfarer comes in several lens sizes and colors, so note down the full reference before ordering the temples.
What you need
- The replacement temples for the 2140 model.
- A precision screwdriver.
- Fine tweezers (optional) to position the screw.
- A soft cloth to rest the glasses on.
How to replace the Wayfarer temples step by step
- Open the temple and lay the glasses down. Place them on the cloth with the temple you are going to replace open, so you have good access to the hinge.
- Undo the hinge screw. Turn it counterclockwise until it comes out. Keep it somewhere safe.
- Remove the old temple. Carefully detach it from the front.
- Fit the new temple. Line up the temple’s hinge with the one on the front until the holes match.
- Insert the screw. Using the tweezers, place it in the hole and give it the first few turns without forcing it.
- Tighten gently. The temple should be secure but open and close without effort.
- Check. Try the glasses on and make sure both temples sit the same.
Common mistakes
- Ordering the temple without checking the reference. There are several versions of the Wayfarer and other very similar acetate models.
- Using a screwdriver that doesn’t fit. It ruins the screw head.
- Overtightening. On acetate, a screw that is too tight can damage the hinge or leave the temple stiff.
- Losing the screw. Work on a clear, light-colored surface.
- Bending the temple cold to adjust it. If you need to adjust the acetate, warm it first with gentle heat.
Frequently asked questions
Are there compatible temples for the Wayfarer?
Yes. As well as the originals, we have compatible temples for the RB2140, a more affordable alternative made to fit your frame.
Can I replace just one temple?
Yes. Choose the correct side when you place your order.
What if I also want to replace the lenses?
On the Wayfarer, the lenses are press-fitted into the acetate: you warm the frame with gentle heat and push the lens out from the inside. We have original Ray-Ban 2140 Wayfarer lenses.
Where can I find screws for the Wayfarer?
In our Ray-Ban 2140 Wayfarer spare parts.
Temples for your Wayfarer
Tip: if the new temple ends up a little loose or pinches behind your ear, you can adjust the curve of the temple tip by warming the acetate with hot water or a hair dryer on a low setting and bending it little by little. Never bend it cold.
Get original Ray-Ban 2140 Wayfarer temples in the color of your frame. We have been a certified EssilorLuxottica distributor since 2018, our parts come with a 3-year warranty against manufacturing defects and standard shipping is free on orders over 37 £. If you have any questions at all, write to us and we’ll help you by email.
Looking for a replacement part for your glasses?
Type the model engraved on the temple arm and we'll show you everything that fits.
