Ray-Ban 3522 Replacement Lenses – Original Lenses RB3522
Restore your sunglasses with Ray-Ban RB3522 replacement lenses, made as original Ray-Ban lenses to preserve the fit, look and sun protection of this double-bridge metal frame. They are the ideal replacement if your lenses are scratched or damaged, or if you want to change the lens color without replacing the whole frame.
The Ray-Ban 3522 stands out for its rectangular shape, metal frame and large sizes, typically suited to medium and large faces. That is why choosing the correct size is essential so the lens fits properly in the rim and the sunglasses remain comfortable to wear.
Compatibility with Ray-Ban RB3522
These lenses are compatible exclusively with the following model:
- Model: Ray-Ban RB3522
- Brand: Ray-Ban
- Available sizes: 61 mm and 64 mm
- Approximate diameters: 66 mm and 69 mm
- Shape: square / rectangular
- Curve: Base 6
- Lens material: polycarbonate / organic material
- Temple material: metal
- Use: sun
- Target: adult
- Product type: original
Before placing your order, check the reference engraved on the inside of the temple. You will normally find an inscription similar to RB3522 followed by the color code and size. You should always choose the same size shown on your frame: 61 mm or 64 mm.
Sizes are not interchangeable. A 61 mm lens will not fit correctly in a 64 mm frame, and vice versa. On a metal frame, forcing the wrong size can leave the lens sitting improperly or slightly deform the rim.
If the numbers on the temple have worn off, you can measure the approximate lens width and compare the shape with your original lens. If you are unsure, we recommend confirming the model before ordering.
These lenses are not compatible with other Ray-Ban models that may look similar. Small differences in the double bridge, metal rim, bevel or curvature can prevent proper installation.
If your sunglasses are not the RB3522 model or you are not sure about the exact reference, you can visit our category of original Ray-Ban lenses to find the compatible lenses for your model.
Original Ray-Ban lenses
This product corresponds to original Ray-Ban lenses for model RB3522. They are designed to match the rectangular shape, Base 6 curvature, selected color and fit of the metal frame.
The original lenses for this model are made of polycarbonate / organic material, a lightweight material that helps reduce the weight of large-size sunglasses and improves comfort on the nose bridge.
Original Ray-Ban lenses include the Ray-Ban logo. Depending on the original reference, they may also feature the RB laser etching on the left lens. On polarized versions, the marking may appear as Ray-Ban P.
Available colors for Ray-Ban 3522
- 13 – Brown gradient
- 71 – Green
- 82 – Silver polarized semi-mirror
- 9A – Green polarized
Color availability may vary depending on Ray-Ban stock and production. You can choose the same color your sunglasses originally had or refresh their look with another finish compatible with your model and size.
Lightweight material for a large-size frame
Because this style has large lenses, lens material is especially important. Polycarbonate / organic material helps keep the sunglasses lighter than an equivalent mineral glass lens, which is particularly useful in metal frames for everyday wear.
Polarized options, when available, are highly recommended for driving and outdoor use, as they help reduce annoying reflections from roads, water, snow or bright surfaces.
Metal double-bridge frame with screw system
The Ray-Ban RB3522 uses a full-rim metal frame that surrounds the lens. Replacement is usually done by loosening the screw on the metal rim, placing the new lens into the groove and carefully closing the rim again.
The metal double bridge adds stability, but it should not be used as a pressure point during installation. To avoid deformation, handle the rim gently and make sure the lens is fully seated before tightening the screw.
What this product includes
- 1 pair of original Ray-Ban RB3522 lenses
- Right lens
- Left lens
- Color and size selected in your order
Lenses are always sold in pairs. Single lenses are not available.
The product does not include the frame, nose pads, screws or tools unless expressly stated otherwise on the product page.
Frequently asked questions
How do I know if I need size 61 or 64?
The size is engraved on the inside of the temple, next to the RB3522 model code. You must choose the same size shown on your frame. If the numbers have worn off, measure the approximate lens width and compare the shape with the original.
Are the right and left lenses the same?
No, they should not be swapped. Even if the shape looks very similar, each lens is made for its corresponding side and must be installed as the right lens or left lens.
Do the lenses include the Ray-Ban logo?
Yes. Original Ray-Ban lenses include the Ray-Ban logo. Depending on the reference, they may also have the RB laser etching and, if polarized, the Ray-Ban P marking.
Are they mineral glass or polycarbonate?
The lenses in this product are made of polycarbonate / organic material, which helps keep the frame lighter and more comfortable.
Can I choose polarized lenses?
Yes, as long as the polarized option is available for your size and color. Polarized lenses help reduce reflections, especially while driving or outdoors in bright light.
Do they include new screws?
No, new screws are not included unless expressly stated on the product page. The original frame screws are usually reused.
What screwdriver do I need?
You will need a small precision screwdriver suitable for optical screws. The tip must fit properly to avoid damaging the screw head.
Is there a risk of bending the double bridge?
Yes, if the frame is forced or if you try to fit the wrong size. The lens must be aligned in the groove before closing the metal rim and tightening the screw.
Example for guidance only. The position and order of the codes may vary depending on the frame.
Your review of Ray-Ban RB3522