Original Ray-Ban RB3947 replacement lenses
Give your Ray-Ban RB3947 back their day-one look without buying a new pair. These are original Ray-Ban replacement lenses, with the brand logo etched on them, sold by an official EssilorLuxottica dealer.
About the Ray-Ban RB3947
The Ray-Ban RB3947 is a full-rim metal frame with irregular-shaped lenses. The lenses are 54 mm wide and 32 mm high (size 54), with a base 4.25 curve, a 18 mm bridge and 145 mm temples. It comes in two sizes, so check which one is yours. Its lenses are made of glass, the classic Ray-Ban material: slightly heavier than plastic, but far more scratch-resistant and optically very sharp.
How to check they fit your glasses
Look at the inside of the arm: you will see RB3947 followed by two numbers. The first one is the lens width in millimetres, and it must match the size you choose (54 and 57). If it has worn off, measure the lens at its widest point or send us a photo and we will tell you.
Features
- Brand: Ray-Ban
- Model: RB3947
- Product: original Ray-Ban lenses with the brand logo
- Size: 54 and 57
- Lens: 54 × 32 mm (size 54), base 4.25 curve
- Material: Glass
- Frame: metal
- Use: sunglasses
Available colours
- Green (31)
- Brown
- Dark grey
- Green (4E)
- Blue polarized
The polarized lenses have a small «P» next to the logo and cut glare from water, snow and wet roads.
How to replace them
On this metal frame the rim opens with a screw next to the hinge. Loosen it without removing it completely, swap the lens keeping its position and tighten again little by little. Work over a soft cloth and do not heat the frame.
See more models in our original Ray-Ban lenses category.
Your review of Ray-Ban RB3947