Original Ray-Ban RB7680S Larry replacement lenses
Give your Ray-Ban RB7680S back their day-one look without buying a new pair. These are original Ray-Ban replacement lenses, with the brand logo etched on them, sold by an official EssilorLuxottica dealer.
About the Ray-Ban RB7680S
The Ray-Ban RB7680S is a full-rim acetate frame with phantos-shaped (rounded) lenses. The lenses are 49 mm wide and 46 mm high (size 49), with a base 4.25 curve, a 21 mm bridge and 145 mm temples. It comes in two sizes, so check which one is yours. Its lenses are made of glass, the classic Ray-Ban material: slightly heavier than plastic, but far more scratch-resistant and optically very sharp.
How to check they fit your glasses
Look at the inside of the arm: you will see RB7680S followed by two numbers. The first one is the lens width in millimetres, and it must match the size you choose (49 and 51). If it has worn off, measure the lens at its widest point or send us a photo and we will tell you.
Features
- Brand: Ray-Ban
- Model: RB7680S
- Product: original Ray-Ban lenses with the brand logo
- Size: 49 and 51
- Lens: 49 × 46 mm (size 49), base 4.25 curve
- Material: Glass
- Frame: acetate
- Use: sunglasses
Available colours
- Grey/blue polarized
- Grey
- Brown
- Green
- Brown polarized
The polarized lenses have a small «P» next to the logo and cut glare from water, snow and wet roads.
How to replace them
On this acetate frame the lens sits in the groove of the rim. To swap it, gently warm the rim with a hair dryer on a medium setting, not too close, until it gives a little; push the lens out from the inside with your thumbs and fit the new one starting from the hinge side. If it does not go in with gentle pressure, do not force it: an optician can fit it in a moment.
See more models in our original Ray-Ban lenses category.
Your review of Ray-Ban RB7680S Larry